Dap wall repair patch

Apply a generous amount of paint with each coat to ensure paint covergae. Always use a paint roller - using a paint brush is not recommended as it can leave brush strokes and won't provide the best coverage. The patch can be cut and customized to different shapes and sizes to fit certain applications such as in corners, along trim and molding, or for outlet applications. When cutting with scissors or a utility knife, make sure the tab is still fully intact so you an remove the protective layer.

Pull the pop-up tab up and away from the drywall towards yourself in order to release the protective layer from the patch. If the protective layer does not completely come off in one piece, use your fingernail to remove the rest of the protective layer prior to applying the next coat of paint.

For additional structural integirty, apply spackling to the damaged area, then apply the patch immediately over the damage. There's no need to wait for the compound to dry prior to applying the patch.

Be sure the surrounding drywall is clean and free of material prior to applying the patch to ensure proper adhesion. It's recommended to de-gloss the damage and surrounding drywall using sandpaper to help achieve a smooth surface and increase adhesion.

Ensure the surface is smooth, dry and free of any debris and jagged edges prior to applying the patch. Time to complete the entire repair will vary based on the environment temperature and humidity as well as the paint brand being used for the repair. Time to complete the repair takes approximately 30 minutes with prepping the surface, applying the patch and painting the first coat while the protective layer is still on.

Wait time is solely based on the time it takes for the paint to dry before applying another coat. Yes, the patch can be cut and customized to different shapes and sizes to fit certain applications such as corners, along trim and molding or for outlet applications. However, cutting the patches outer edges to fit a smaller size repair is not recommended as you will lose the feathered edge and gradient which will effect the overall appearance. We do not recommend using a heat gun to accelerate the paint dry time as heat guns get too hot and may damage the paint or the patch itself.

However, a hair dryer, on a cool, low setting at a safe distance from the wall could be used to accelerate the dry time of the paint without interfering with the completed repair. We do not recommend applying patches on top of one another to help cover a larger area of damage.

For best results, use the recommended patch damage guidelines and choose the patch size that is sufficient for your repair. Yes, you can clean the repaired patched surface, however, we recommend waiting to clean the surface until after the paint has finished drying up to 4 weeks based on paint manufacturer recommendations.

We recommend waiting until the drywall surrounding the patch is fully dry approx. However, you can wait hours or even days to remove the protective layer if you are not going to apply the final two coats of paint immediately. Based on paint manufacturer recommendations, paint may not be fully cure up to 4 weeks after application. Waiting the full 4 weeks, although may not be necessary, may be ideal prior to exposing to impact or cleaning to confirm the patch and paint adhesion is fully dry.

User will also notice an increase in the invisibility and blending of the repair into the surrounding drywall as the paint completely dries.

The unique benefit of DAP Eclipse patches is that you do not need to use drywall mud or spackling to complete the repair. We do not recommend using joint compound or spackling over top of the patch as it may not provide acceptable finished results. However, DAP Eclipse is compatible with aerosol spray textures and textured rollers to complete a texture wall repair.

The Eclipse patches help you achieve an exponentially better repair than other products on the market. Once damage is caused, your walls will never be the same no matter what product your using to repair the damage. The design of the patch does an excellent job of hiding the outline of the patch and providing a superior finished appearance. Until the first coat of paint is applied, dried and you remove the protective layer, the patch will be highly visible.

Once the protective layer is removed and your additional coats of paint are applied, you will notice a significant difference in the visibility of the patched area as it will blend in smoothly and evenly with the surrounding drywall making a highly invisible repair.

Prepping the surface is a crucial step in the application process. The surface should be as smooth, dry and free of any blemishes or debris as possible. We also recommend sanding the drywall surface prior to applying the patch to de-gloss the surface and increase adhesion. Sanding the patch down using sandpaper is not recommended and may not provide acceptable finished results.

We do recommend sanding the drywall prior to applying the patch to de-gloss the surface to promote and increase adhesion. Yes, you can nail or screw back into the patch as long as there is drywall directly behind the patch where the nail or screw is placed. For best results, we recommend using DAP Eclipse on dry drywall. If you happen to have damp or wet drywall, we recommend completing a full drywall replacement to ensure no mold or mildew starts to grow. DAP Eclipse is specifically designed to repair drywall damage.

At this time, we only recommend using this product for drywall applications. Yes, you can apply spackling or drywall mud behind the patch prior to adhering the patch to provide additional support to your repair. You do not need to wait for the compound to dry prior to applying the patch, however, ensure the surrounding drywall is clean and free of material prior to applying the patch to ensure proper adhesion.

We recommend pulling the tab up and away from the drywall towards yourself in order to release the protective layer from the patch. We recommend always using a paint roller. Once the patch is adhered to the drywall surface, we do not recommend removing and repositioning.

This will significantly impact the patch adhesion to the drywall and may not provide acceptable, permanent, long-lasting results. To help position the patch properly on the first try, use the gray center circle of the patch as a guide to align over the center of the damage.

It is recommended to only use for interior drywall walls and ceilings. The product is compatible with aerosol spray textures and textured rollers. If repairing textured walls or ceilings, remove the protective layer by pulling the pop-up tab immediately after adhering the patch to the drywall no need to apply the first coat of paint. Then apply texture, allow to dry thoroughly, then paint. Repair wall holes and cracks easily — just clean the surface; apply the patch, spackle and finish.

The no-rust mesh aluminum backing provides a sturdy surface while allowing more air circulation for quicker drying time. The patch is strong enough to repair wall holes, yet cuts easily with scissors to match the size of the hole.

Color Available: White Metallic. Please note the specific item you have requested may not be in stock at the time of your visit. We recommend calling the store first to ensure that the product you have requested is available.